Inserting Batteries - Biosynex MedicAid 858754 Manuel

INSERTING BATTERIES

Low battery warning:
You must replace the batteries when the low battery
icon «
screen does not turn on after pressing the POWER
button.
To change the batteries:
1. Open the battery compartment cover.
2. Make sure the polarity of the batteries is correct
and insert two AAA batteries
3. Close the battery compartment cover.
Notice-Medicaid-tensio-858754-v1-042017-r1.indd 27
» appears on the screen or when the
Recommendations
1. Always use new batteries; never mix new and old
batteries.
2. Do not use rechargeable batteries; rechargeable
batteries may vary in quality and power. The use of
rechargeable batteries may affect the performance
of this device.
3. Removing the batteries is recommended if the
device is not being used for a prolonged period of
time.
4. Batteries must be disposed of in accordance with
environmental standards and institutional policies.
27
18/04/2017 15:24:36