Cleaning, Storage, And Maintenance; Cord Tangling - Polaris robotic 9650iQ Sport Mode D'emploi

Page 24
7

Cord Tangling

Tangling can occur more frequently when the cleaner is not attended to after each
cleaning cycle. The tangle-reducing swivel, in addition to proper installation, general
maintenance and the following troubleshooting steps can help to avoid cable
challenges.
NOTE: For optimal patterning and reduced tangling, the floating cable should enter the water near
Cleaning, Storage, and
Maintenance
To avoid electric shock and other hazards which could result in permanent
injury or death, disconnect (unplug) the cleaner from the power source before
performing any cleaning and maintenance.
IMPORTANT
Cleaner power cable may become tangled if correct
procedure is not followed after each cleaning cycle.
the middle of the pool length (Figure 16). Only place enough cable in the water to reach the
farthest point in the pool.
cleaner
Max
Floating Cable
Length
Figure 16. Optimal Entry Point in Pool
WARNING
Recommended
cleaner
Recommended
entry point
WARNING: Do not use
an extension cord
Not
caddy /
control unit