Lift System; Installing Iaqualink; Download The App - Polaris robotic 9650iQ Sport Mode D'emploi

Lift System

The Easy Lift Removal System is designed to assist in retrieving the robot from
the pool. Lift System can be activated at any time during or after a cleaning
cycle.
1. Press to begin the automated procedure.
The screen displays
NOTE: To stop the procedure at any time, press and release the button again.
2. Next, Press and HOLD
facing the wall of your choice for retrieval, release the button.
3. Cleaner will drive forward and up the wall it is facing. It will wait at the
water line to be retrieved.
4. When in reach, grab the cleaner handle and begin to pull cleaner out of
the water. The cleaner will quickly expel water to allow for lighter, easier
removal.
NOTE: Never lift the cleaner out of the pool by the floating cable.
5

Installing iAquaLink

The iAquaLink app is available for download from
the iTunes or Google Play store.
With iAquaLink Control, you can connect to your robotic cleaner from anywhere,
anytime with access to advanced features, additional programming options and
troubleshooting advice.
Before you begin installation, make sure you have the
following:
• Robotic Cleaner submerged in the pool.
• Control Unit connected and plugged into a GFCI outlet.
• Wi-Fi enabled smart device (phone or tablet)
• Wi-Fi router with sufficent signal strength at the Control Box
IMPORTANT: Have your Wi-Fi network password available.
•

Download the App

Install or Update the iAquaLink app from the iTunes or Google Play Store.
Once the download is complete, select the iAquaLink icon on your smart
device to open the app.
when the Lift System is in operation.
to rotate the cleaner. Once the cleaner is
™
Page 17