Using The Control Unit; Start / Stop Cleaning - Polaris robotic 9650iQ Sport Mode D'emploi

Page 16

Using the Control Unit

The control unit can be used to initiate basic cleaning features and to connect the device to home
Wi-Fi. For more information on connecting your cleaner to Wi-Fi functions, see section 5, Installing
iAquaLink .
™
Lit when in Wi-Fi to Phone Mode
LED: Direct Connection (RED)
Wi-Fi to Phone
Button
Dirty Canister
Indicator
Select Cleaning Surface
• Floor
• Floor and Wall
• Waterline

Start / Stop Cleaning

The factory default cleaning surface setting is Floor and Wall
Use to change cleaning surface setting.
Toggle between:
With cleaner submerged in the water, press
The control box will display the time remaining for the selected cycle in hours and minutes.
NOTE: The control box automatically goes into standby mode after 10 minutes and the display screen turns off. Press any key
to exit standby mode and view remaining cycle time. Cleaner will continue to function in standby mode.
Press to interrupt and cancel an in-progress cleaning cycle.
Lit to Confirm Connection.
LEDs:
Floor Only , Floor and Wall
LAN Connection (RED)
WEB Connection (RED)
and Waterline only
to begin operation.
View Time Remaining
and Error Display
Use to Remove
Cleaner
from Pool
(Easy Lift)
Start/Stop Cleaner
Operation
Figure 15. Cleaner Control Unit
.