Technical Specifications - Conrad Electronic Mc CRYPT DJ-2200 Mode D'emploi

Table des Matières

Publicité

2. Intended use
The "Mc CRYPT DJ-2200" is a semi-professional CD player. It used to play standard audio CDs. This appli-
ance is intended for operation at home and in semi-professional environments.
The low-level audio output signal must be transmitted to an external amplifier (which might be used togeth-
er with a mixer or pre-amplifier) for amplification. The appliance should not be connected directly to loud-
speakers.
The CD player consists of a control unit and a dual disc drive. Both units may only be operated together.
Any other use than that described above can result in damage to the product, involving such hazards as
short-circuits, fire and electrocution. No part of the product may be modified or retrofitted and the housing
may not be opened!
The safety instructions must be observed at all times.
3. Equipment features
• Dual-CD-disc drive
• Remote control unit
• 8 x over-sampling, 1 bit D/A converter
• Jog shuttle wheel
• Separate track skip and search buttons
• AUTOCUE function
• Installation possible in a 19" rack system
• Pitch speed control of +/- 4%, +/- 8%, +/- 16%
• LOOP function (playback loop)
• RELAY function (automatic switchover between the two CD drives)
• Frame-precise search (frame = smallest possible scanning unit of the CD player)
• Analogue and digital audio outputs
• Fader start function
4. Scope of delivery
• Control unit
• Drive unit
• 2 x stereo cinch cables
• 1 x system connection cable
• 2 x fader start lines (jack cable)
• Mains cable
• Operating instructions
24
All manuals and user guides at all-guides.com
Repairs other than those just described should only be performed by authorised electri-
cians.
14. Useful notes on handling CDs
• Hold CDs only by the edges. In this way you can prevent fingerprints and
dirt on the surface.
• Only touch your CDs with clean hands.
• If a CDs is dirty nevertheless, wipe it clean from the centre to the rim with a
soft, lint-free cloth. Avoid circular motion when cleaning CDs. Do not use any
solvents.
• Please use a commercially available CD cleaning agent (do not use a clean-
ing agent for vinyl records) to remove dirt which is difficult to remove, while
observing the instructions of the manufacturer.
• Do not write on your CDs since this can result in reading errors. Do not apply
any stickers or similar.
Stickers can become stuck in the CD player, for example, and damage it.
• Store your CDs in the supplied CD cases after playing them.
• Avoid exposing CDs to direct sunlight, heat and moisture when storing them.
15. Disposal
Dispose of the product at the end of its service life in accordance with the current statutory regu-
lations.

16. Technical specifications

Operating voltage:
230 V~/50 Hz
Power consumption:
14 W
Playback media:
Standard audio CDs, 8 cm and 12 cm and CD-R
Output voltage:
2 V RMS +/- 0.5 dB
Channel separation:
89 dB
Pitch speed control:
+/-4%, +/-8%, +/-16%
Pitch bending speed control
+/-16%
Frequency response:
20–20,000 Hz, +/-0.4 dB
S/N ratio:
92 dB
Distortion factor:
0,01%
Analogue audio output:
Unsymmetrical stereo cinch sockets
Digital audio output:
Unsymmetrical cinch sockets
Drive unit weight:
Approx. 4.8 kg
Weight of the control unit:
Approx. 1.4 kg
Drive unit dimensions (W x H x D):
482 x 88.8 x 251 mm
Control unit dimensions (W x H x D):
482 x 88.8 x 60 mm
Ambient conditions:
Storage temperature range:
-20°C to 60°C
Operating temperature range:
+5°C to +35°C
Humidity range:
25% to 85 % relative humidity (non-condensing)
41

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

30 19 66

Table des Matières