Evolution R230 DCT Instructions page 9

www.evolutionpowertools.com
and arbor bolt were specially designed for
your machine and will provide optimum
performance during cutting operations.
• This machine is fitted with the correct
moulded plug and mains lead for the
intended country of use. Do not alter or
modify the mains cable or plug in any way.
If the mains lead or the plug are damaged in
any way, they must be replaced with original
replacement parts by a competent technician.
• Where possible always use a method of
dust control when cutting concrete, either
Dust extraction or water suppression
where applicable. When using dust
extractors with Evolution Disc Cutters ensure
these are rated as Class M or Class H when
cutting concrete.
WARNING: This machine must not be used to
cut any material that may contain asbestos. If the
presence of asbestos is suspected, consult the
relevant authorities for advice.
PPE (Personal Protective Equipment)
Note: If using this equipment on a construction
site it is important that the operator conforms to
any site rules/regulations that may apply. Consult
the site foreman or other responsible person for
details.
• Wear suitable clothing. This could include a
Boiler Suit or Padded Coverall and Hi Vis jacket
etc.
• Wear suitable footwear. Safety shoes
with steel toecaps and anti-slip soles are
recommended.
• Wear suitable Safety Glasses. A Full Face
Safety Shield or Safety Goggles with side
shields is recommended.
• Protect your hearing. Wear suitable ear
protectors.
• Wear suitable gloves. High grip gloves are
recommended.
• Wear respiratory protection. A dust mask
with replaceable filters which provide
protection against fine toxic dust, fibres and
vapours is recommended.
• Wear a Safety Helmet. The use of a Safety
Hat may be compulsory on some construction
sites to protect the operator from potential
overhead dangers.
(4.1) GETTING STARTED - UNPACKING
Caution: This packaging contains sharp
objects. Take care when unpacking. Remove
the machine, together with the accessories
supplied from the packaging. Check carefully
to ensure that the machine is in good condition
and account for all the accessories listed in this
manual. Also make sure that all the accessories
are complete. If any parts are found to be
missing, the machine and its accessories should
be returned together in their original packaging
to the retailer. Do not throw the packaging away;
keep it safe throughout the guarantee period.
Dispose of the packaging in an environmentally
responsible manner. Recycle if possible. Do not
let children play with empty plastic bags due to
the risk of suffocation.
ITEMS SUPPLIED
(4.2)
DESCRIPTION
Instruction Manual
Blade *
Multi-tool (Adjustments)
Wheeled Undercarriage
Rubber Cap
(extraction port)
Hose Connector
(R300DCT+)
* Some models supplied with no blade. See
specification table for details.
(4.3) ADDITIONAL ACCESSORIES
In addition to the standard items supplied with
this machine the following accessories are also
available from the Evolution online shop at www.
elovutionpowertools.com or from your local
retailer.
(4.4)
DESCRIPTION
Specialist cutting blades
are available
information and details
Hand pump water bottle
information and details
Foot pump water bottle
information and details
Carry Case
information and details
Dust port adaptors
information and details
Wet cut kit
(to convert R300DCT)
information and details
9
QUANTITY
1
1
1
1
1
1
PART NO
Consult the Evolution
Helpline for further
Consult the Evolution
Helpline for further
Consult the Evolution
Helpline for further
Consult the Evolution
Helpline for further
Consult the Evolution
Helpline for further
Consult the Evolution
Helpline for further
EN