Declaration Of Conformity - GYS TROLLEY IW1 Mode D'emploi

WARRANTY
The impact-wrench support is covered by warranty for two years starting from the date of shipment. The warranty
covers defects in the hardware and/or manufacturing. This warranty is only valid if the maintenance has been carried
out according to the instructions in this user manual. The warranty does not cover periodic maintenance, calibration or
regular adjustments.
Labor costs related to such actions are not covered. Incidents considered to be misuse or abuse may void the warranty.
DISASSEMBLY AND RECYCLING
To disassemble the impact-wrench support, refer to the section entitled ASSEMBLY PROCEDURE and reverse the order
of the instructions.
The impact-wrench support must be disposed of in accordance with the current environmental and disposal guidelines
of the country in which it is located.

DECLARATION OF CONFORMITY

GYS certifies that the new product, TROLLEY IW1 (063136), has been made conforming to Directive 2006/42/CE,
Machine, of 2006.05.17 and, consequently, complies with following standard:
- EN ISO 12100 : 2010
The CE marking was approved in 2019 The full declaration of conformity is available on our website.
TROLLEY IW1 EN
29