get
ready
Unpack the box
Chair Base
Backrest
1. Attach the backrest to the chair base.
IMPORTANT: This step requires two people to prevent injury and/or damage to the backrest.
1. Using two people, lift the backrest into position on top of the chair base, aligning the track on the sides of
the backrest with the brackets on the chair base.
2. Lower the tracks on the sides of the backrest carefully onto both brackets simultaneously, keeping the
backrest level, until the backrest clicks into place.
Backrest
Chair Base
humantouch.com
Backrest pad
Track on side of
backrest
Bracket on chair base
4
Setting up your Human Touch Massage Recliner is easy.
Just slide the backrest onto the chair base, connect the
two, attach the backrest pad, and you're done!
2. Attach the backrest pad.
Zip the backrest pad to the backrest.
3. Plug the backrest into the chair base.
Plug the backrest cable into the receptacle located at
the rear lower corner of the chair base. Using the Allen
wrench and Allen screw provided, install the screw
into the hole in the connector housing to secure the
connectors together.
4. Plug the power cord into an appropriate power source.
Allen screw
5