Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8. Insert and tighten the ground screw into
the left and right upper hinges with a philips
screwdriver(+).
ground wire
9. Connect the electronic wire on the top of the
refrigerator.
Reassembling the freezer door
1. Pull out the rails to the full length on each sidle
of the cabinet evenly.
2. Hang the freezer door front onto open slot on
the sides.
14_ setting up
DA68-02657A-12.indb 14
Slot
3. With the 10mm wrench, reattach 4 bolts to
connect the rail with the door.
4. With the drawer pulled out fully, insert the
drawer box into the rail system.
Be careful not to scratch or dent the
sliding rail by letting it strike the floor.
CAUTION
Make sure that you mount the freezer
basket in the right position when
CAUTION
removing / installing the freezer door.
Failing to do so may result in the door not
opening or closing properly.
2018. 10. 8. 오후 5:46
Publicité
Table des Matières
