Samsung RF221 Serie Manuel D'utilisation page 13

3. Remove 4 hex head bolts from both sides with
a socket wrench(10 mm).
Reassembling the fridge door
1. Insert and tighten the screw into the left
and right middle hinges with a philips
screwdriver(+).
2. Insert and tighten the 2 hex head bolts into
the left and right middle hinges with an allen
wrench(3/16").
3. Replace the middle hinge cap.
DA68-02657A-12.indb 13
4. Place the hole in the bottom of the left door
over the middle hinge.
5. Position the top table in place. Insert and
tighten the 3 screws into the top table with a
philips screwdriver(+).
6. Insert the left upper hinge shaft into the hole
the corner of the fridge door.
7. Insert the upper hinges into the holes at the
top of the door. Insert and tighten the 3 hex
head bolts into the left and right upper hinges
with a socket wrench.
Top Table
setting up _13
2018. 10. 8. 오후 5:46