Denios PolySafe-Depot Typ K Mode D'emploi page 15

Side bar position
Fitting the foot clamps
Fitting the shelf on the cross bars.
Position the side frames on the left and right of
the spill pallet inside the assembled PolySafe
Depot. Fit the upper and lower cross bars. Fit the
centre cross bar. Secure the cross bars with the
safety pins. Ensure the rack frame is centrally
positioned.
Längenriegel = cross bar
Sicherungsstift = safety pin
Seitenrahmen = side bar
For the exact number and position of the cross
bars, see "Position of the cross bars".
235412_BA_PSD_K_002_INT Seite 15 von 31
07/2015