Claims For Defects And Liability; Safety Instructions; Transport, Placement And Installation; Transport Using Lifting Equipment - Denios PolySafe-Depot Typ K Mode D'emploi

Storage of inadmissible containers: Containers must comply with the guidelines for the transport of

hazardous goods.
Unapproved combinations: Media which can react with one another may not be stored above the

same spill pallet.
Exceeding storage quantity and load capacity.


Claims for defects and liability

8.3
We are not liable for claims for defects, damage or injury to persons or property caused by one or more of
the following:
Improper use of the equipment.

Incorrect installation, operation and maintenance.

Unapproved modifications.


Safety instructions

9
 Refrain from any unsafe working practices.
 Observe the applicable rules for health and safety at work.
 No fire, naked flames or smoking.
 Packaging and containers must meet the transport regulations.
 Only store materials for which the sump is designed.
 Do not exceed the load capacity of the shelf.
Store materials so that all containers and the spill pallet are visible.

Any build-up of snow on the roof must be removed immediately.


Transport, placement and installation

10
3.1

Transport using lifting equipment

Transport the Depot only when empty.
The Depot can be lifted and transported from two sides by a forklift truck or a pallet truck.
3.2

Conditions for placement

The Depot must only be assembled on even, paved surfaces. The Depot is suitable for installation out-
doors or indoors. The Depot must not be located on a roadway and must be protected from damage by
235412_BA_PSD_K_002_INT
WARNING
Seite 12 von 31
07/2015