Using the grass trimmer as an edge trimmer
To cut the edges of lawns and fl ower beds, the grass trimmer can be
converted as follows:
•
Remove the battery pack
•
Pull the lock for the rotatable motor head in the direction of the ar-
row as shown in Fig. 13.
•
Turn the motor head through 90° in the required direction until it
latches in place.
•
Now you have converted the grass trimmer to an edge trimmer for
cutting the lawn vertically.
7. Care and maintenance
•
Always keep the tool clean and dry and protect it from oil and gre-
ase.
•
Wear safety goggles to protect your eyes during cleaning.
•
Always keep the tool and the air vents clean in order to ensure
safe and correct use.
•
Check the ventilation grilles at the motor and at the On/Off switch
for dust and foreign bodies. Remove layers of dust with a soft
brush.
•
If required, use a soft damp rag to wipe the tool housing clean.
You can use a mild cleaning agent but no alcohol, petrol or other
cleaning agent.
•
Never use aggressive cleaning agents to clean plastic parts.
•
Lubricate all moving parts regularly.
•
Check all fasteners regularly. Vibrations might cause fasteners to
become loose in the course of time.
•
Use a brush to remove deposits from the safety guard.
Anl_PE_ART_18_Li_Basic_SPK7.indb 265
Anl_PE_ART_18_Li_Basic_SPK7.indb 265
- 265 -
GB
21.01.16 13:58
21.01.16 13:58