Pattfield Ergo Tools PE-ART 18 Li BASIC Traduction De La Notice Originale page 256

•
Work only when visibility is adequate.
•
Make sure you stand squarely at all times while working. Be care-
ful when walking backwards. Tripping hazard!
•
Never leave the equipment unsupervised in the work area. If you
stop work for a while, leave the equipment in a safe place.
•
If you stop your work in order to go to another area to work, you
must make sure that the equipment is switched off while you are
going there.
•
Never use the equipment while it is raining or in damp or wet sur-
roundings.
•
Protect your equipment against moisture and rain.
•
Before you switch on the equipment, check that the cutting unit
will not touch any stones or other objects.
•
Always wear suitable working clothes to prevent injuries to the
head, hands and feet. For this purpose wear a helmet, safety
goggles (or visor), high boots (or strong shoes and long trousers
made of tough fabric) and work gloves.
•
When the equipment is in operation, you must always hold it away
from your body!
•
Do not switch on the equipment when it is turned around or when
GB
it is not in working position.
•
Switch off the motor when the equipment is not being used, when
you leave it unsupervised, when checking the equipment, when
removing or replacing the spool, or when transporting the equip-
ment from one place to another.
•
Keep the equipment away from other people, especially children,
and from pets. There may be stones and other objects in the grass
that is cut and thrown up.
•
When you are working, keep a distance of at least 5 m from other
persons and pets.
•
Do not cut against hard objects. This will help you to prevent
causing injury to yourself and damage to the equipment.
•
Use the edge of the safety guard to keep the equipment away
from walls, different surfaces and fragile objects.
Anl_PE_ART_18_Li_Basic_SPK7.indb 256 Anl_PE_ART_18_Li_Basic_SPK7.indb 256
- 256 -
21.01.16 13:58 21.01.16 13:58