Brick And Plaster Installation - sistem air FLEXIN Guide D'installation

Brick and plaster Installation

4
5
6
20
Use the template provided in this book-
let to cut a hole in the brick (fi gure 4).
Insert the back of the inlet into the wall
and screw the frame of the inlet directly
to the brick (fi gure 5).
Once the piping network and wires are
connected, seal the back of the inlet into
the wall by adding plaster all around it.
Make sure that the thickness of the pla-
ster is fl ush with the inlet (about 1 cm)
all around the inlet (fi gure 6).