Bang & Olufsen BEOLAB 28 Mode D'emploi page 7

B E O L A B 2 8
C O N N E C T I N G T O A B A N G & O L U F S E N T E L E V I S I O N
You can use your Beolab 28's as a stereo pair together with a Bang & Olufsen
television, either through Power Link cables or wirelessly through Wireless Power
Link.
During the first-time setup in the Bang & Olufsen app, you will have the option of
selecting which type of connection you will use between your Beolab 28's and your
television.
When Power Link is selected, it is permanently enabled and you can always connect
cables to your television.
By selecting Wireless Power Link, the wireless pairing will be open for 15 minutes.
This selection can always be changed or restarted in Product settings menu in the
Bang & Olufsen App.
Find the relevant instructions for how to set them up with your television, in the
guide for your Bang & Olufsen television model.
Once connected to the television, the user interface on top of the speakers will be
disabled, except for the status LED in the middle.
The speakers will behave as a secondary system and are controlled and operated
through the television.
Depending on the type of television, different cables and adaptors are needed.
Cables and adaptors are available from your Bang & Olufsen retailer.
If you want to connect two speakers to one PL socket on the Soundcenter or
television, it is not possible to loop the cable between the speakers, an extra Power
Link splitter is needed, contact your Bang & Olufsen retailer for more information.
7