Bang & Olufsen BEOLAB 28 Mode D'emploi page 4

4
R E M E M B E R W H E N S E T T I N G U P
Make sure the products are assembled and set up correctly and according to the
assembly instructions.
You can set up a stereo pair in the Bang & Olufsen App. When you set up your
second Beolab 28 you will be asked if you want to set them up as a stereo pair.
This is something you can also always do later under Sound settings on the product
page of your Beolab 28 in the Bang & Olufsen App.
During first time setup, make sure the product is connected to a network and
software is updated prior to connecting them with a Bang & Olufsen television. This
is all done through the Bang & Olufsen App.
When setting up your Beolab 28 as a stereo pair, make sure that all input cables are
connected to the same speaker, which should be set up as the primary speaker of
the pair.
D A I L Y U S E
The touch surface on top of your Beolab 28 will light up when you approach, ready
for you to control your music.
Tap to play or pause
Swipe in a circle near the edge to control volume
Tap on the arrows to switch tracks
Tap the Bluetooth button to switch it on or off
Note: In a stereo pair, the Bluetooth and microphone buttons are disabled on the
secondary speaker. To operate these functions, use the buttons on the primary
speaker.
B E O L A B 2 8