Rectangle Heat Exhaust Hose Connector; Heat Exhaust Hose Short Connector - ProBreeze PB-AC04 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation
Prior to and after installation adhere to
the below:
When moving the appliance to the chosen
location ensure it is kept in an upright position.
Do not place or use the appliance, power cord,
or any accessories in a bathroom, wet, or damp
place.
Place the appliance on a flat and dry surface.
Keep it at least 50cm away from surrounding
walls and/or objects.
Leave the appliance in an upright position for
at least two hours prior to first use.

Rectangle Heat Exhaust Hose Connector

Installation
1.
Stand the heat exhaust hose upright.
2.
Place the exhaust hose connector on top of
the heat exhaust hose and push down firmly
so that the neck sits over the heat exhaust
hose.
3.
Holding the heat exhaust hose firmly at the
bottom screw the rectangle heat exhaust
hose connector onto the heat exhaust hose.

Heat Exhaust Hose Short Connector

Installation
1.
Stand the heat exhaust hose upright with the
rectangle heat exhaust hose connector at the
bottom.
2.
Place the exhaust hose short connector on top
of the heat exhaust hose and push down firmly
so that the neck sits over the heat exhaust hose.
3.
Holding the heat exhaust hose firmly at the
bottom screw the heat exhaust hose short
connector onto the heat exhaust hose
07 | English
2
3
3

Publicité

Chapitres

Table des Matières
loading

Table des Matières