ProBreeze PB-AC04 Mode D'emploi page 17

Noisey.
The compressor does not
work.
The remote control does
not work.
Display showing E2.
Display showing E3.
Display showing E4.
Disposal
This marking indicates that this product should not be disposed of with other
household waste throughout the EU. This is to prevent the possible harm to the
environment and human well-being. Contact your local authority for information
regarding the collection systems available. If possible, recycle it responsibly to
promote the sustainable reuse of resources.
Issue
The air-conditioner is not
operating.
other heat sources.
Dirty filters.
Air inlet or air outlet clogged.
Appliance not on a flat surface.
Initiation of overheat protection.
Too far from appliance.
The remote control is not pointing
towards the receiving head of the
remote control.
The battery is dead.
Room temperature sensor failure.
Pipe temperature sensor failure.
Anti-frost protection.
Cause
No power.
Water tank full.
other heat sources.
Clean filters.
Remove the obstruction.
Place the appliance on a flat surface.
Wait three minutes until the temperature
decreases and then turn on the unit.
Bring the remote control closer to the
appliance and ensure that the remote
control is pointing toward the
receiving head of the remote control.
Replace the battery.
Arrange for a professional to check
the room temperature sensor and
related circuits.
Arrange for a professional to check
the pipe temperature sensor
and related circuits.
Appliance returns to operating at
chosen settings once the internal pipe
temperature exceeds 8°C.
Resolution
Connect the unit to a live power socket
and turn it on.
Drain the water stored in the unit.
Ambient temperature too low.
English | 16