Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
16
P
lacing and Leveling
Please ensure that the transit restraint has been removed before operating your
machine.
1
Place the machine on a flat and firm surface which allows proper clearance.
Concreate flooring is best. Washer should not be installed
on rugs or exposed to the weather.
We suggest a minimum clearance of 1" from right and left
sides and 4" from rear wall.
Caution
If the washer is installed on a uneven,weak or tilted floor causing excessive vibration,
spin failure or "
It must be placed on a firm and level floor to prevent spin failure.
I Washer with Casters
An insecure installation may cause walking during spin cycles because the washer has casters for
convenience to move.
To protect it from walking, place the leg stoppers, which are provided as a accessory, under the two
front legs of washer as shown in the figure.
2
Check that the machine is level and
securely installed not to move.
Open the lid and look from above to see if it is
same as shown beside.
" error can happen to it.
more than 4"
more
than
1"
Caster
Leg Stopper
Top view of the machine
more than
1"
Publicité
Table des Matières
