Pattfield Ergo Tools PE-ART 18 Li Traduction De La Notice Originale page 274

Using the grass trimmer as an edge trimmer
To cut the edges of lawns and fl ower beds, the grass trimmer can be
converted as follows:
•
Remove the battery pack
•
Pull the lock for the rotatable motor head in the direction of the ar-
row as shown in Fig. 20.
•
Turn the motor head through 90° in the required direction until it
latches in place (Fig. 21).
•
Now you have converted the grass trimmer to an edge trimmer for
cutting the lawn vertically.
7. Care and maintenance
Before putting away or cleaning the grass trimmer, switch off and re-
move the battery pack.
•
Always keep the tool clean and dry and protect it from oil and gre-
ase.
•
Wear safety goggles to protect your eyes during cleaning.
•
Always keep the tool and the air vents clean in order to ensure
GB
safe and correct use.
•
Check the ventilation grilles at the motor and at the On/Off switch
for dust and foreign bodies. Remove layers of dust with a soft
brush.
•
If required, use a soft damp rag to wipe the tool housing clean.
You can use a mild cleaning agent but no alcohol, petrol or other
cleaning agent.
•
Never use aggressive cleaning agents to clean plastic parts.
•
Lubricate all moving parts regularly.
•
Check all fasteners regularly. Vibrations might cause fasteners to
become loose in the course of time.
•
Use a brush to remove deposits from the safety guard.
Anl_PE_ART_18_Li_SPK7.indb 274 Anl_PE_ART_18_Li_SPK7.indb 274
- 274 -
19.09.2016 09:38:35 19.09.2016 09:38:35