afriso Flow-Control 3/K Notice Technique page 42

The suction line can be connected to the withdrawal fitting with the enclosed
hose connector.
Mounting
1. Remove the cover using a screw-
driver.
2. Check whether the O ring is in the
cover of the hose connection.
3. Mount the enclosed hose connec-
tion.
4. Push the vent hose onto the hose
connection and route it back to the
tank next to the suction line.
5. Fixate the vent hose with cable
ties.
6. Mount the other end of the vent
hose to the de-aeration line or the
return connection of the with-
drawal fitting at the tank to avoid
clogging.
Flow-Control
EN
18