USE AS A 12V DC POWER SUPPLY
This device can be used as a 12V DC power supply for many electrical debices such as radio, fan, electrical tools,
camera, TV...
• Turn the knob to the OFF position.
• Plug the cigarette lighter socket of your electrical device in the Booster (cable not included).
• Turn the switch onto the ON position.
The output is protected by a 20A thermal circuit-breaker.
INTERNAL BATTERY TESTER
This device is designed with an internal battery tester which will show the condition of the internal battery. Use the test
knob (6). The result will be displayed on the screen: if the result is between 0 and 12 the battery is deeply discharged
and needs to be charged urgently. If the voltage of the battery is above 12.5V the battery is in good condition.
LED LIGHT
This device has an integrated light comprised of 7 powerful LED's.
PROTECTIONS
This device is designed with many protection features :
• ON/OFF switch to protect against overvoltage when connecting.
• An alarm beep in case of reversed polarity and misuse.
• Copper cable 2 x 1.30m, ø 25mm² with 600A insulated clamps.
• 2 x 200A fuse located on the plastic case. Replacement fuses are located at the back of the device.
SAFETY
• WARNING! Explosive gas , avoid flames and sparks . When charging, the device should be placed in a ventilated area.
• Protect the unit from rain and moisture
• If the power cable is damaged it must be replaced by the manufacturer , its after sales or a similarly qualified person
to avoid hazard.
• Respect the connection sequence indicated .
• Product subject to separate collection , do not dispose in domestic waste .
• This appliance is not intended for use by persons (including children) with reduced physical , sensory or mental
capabilities, or lack of experience or knowledge, unless through a person responsible for their safety, supervision or
instruction concerning use of the appliance .
• Do not open the device. Modifications not performed by a manufacturer's technician will void the warranty .
• Check that the available voltage corresponds to the one indicated on the nameplate of the charger.
• Never short-circuit the clamps when the switch is ON.
6
GYSPACK 750
EN