Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Compact 190
to serious injuries.
b)
Wear personal safety equipment and always wear safety goggles.
mask, non-slip safety shoes, safety helm or ear protection, depending on the type of power tools, reduces the risk of injury.
c)
Avoid accidental starting-up. Ensure that the switch is in the "OFF" position before inserting the plug into the socket.
Accidents can occur if you carry the power tool while your nger is on the switch or if you connect the power tool to the power
supply which it is on.
d)
Remove setting tools or wrenches before switching on the power tool.
lead to injuries.
e)
Avoid an unnatural posture. Ensure that you are standing securely and have your balance at all times.
you can control the tool better in unexpected situations.
f)
Wear suitable clothing. Do not wear wide clothing or jewelry. Keep your hair, clothes and gloves away from moving
parts. Loose clothing, jewelry or long hair can be caught in moving parts.
g)
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
4. Careful Handling and Use of Power Tools
a)
Do not overload the tool. Use the power tool designed for the work that you are doing.
speci ed performance range if you use the suitable power tool.
b)
Do not use power tools whose switch is defective.
repaired.
c)
Remove the plug from the socket before carrying out tool settings, changing accessories or putting the tool away.
This precautionary measure prevents unintentional starting of the tool.
d)
Store unused power tools so that they are inaccessible to children. Do not let persons use the tool who are not
familiar with it or who have not read these instructions. Power tools are dangerous when they are used by inexperienced
persons.
e)
Take proper care of your tools. Check whether the moving parts function trouble-free and do not jam, whether parts
are broken or damaged so that the tool function is impaired. Have damaged parts repaired before using the tool. Many
accidents have their origin in power tools that have been maintained badly.
f)
Use the power tool, accessories, insert tools, etc. in accordance with these instructions and in a fashion speci ed for
this special tool type. Take the working conditions and the activity to be carried out into consideration. The use of
power tools for purposes other than the intended ones can lead to dangerous situations.
5. Service
a)
Have your tool repaired only by quali ed specialist personnel and only with original spare parts.
tool safety is maintained.
a)
If the supply cord is damaged, it must be replaced by the manufacturer or it's service agent or a similarly quali ed
person in order to avoid a safety hazard.
Health protection
Caution! Wear breathing equipment: Paint mist and solvent vapors are damaging to health. Always
wear breathing equipment and only work in well ventilated rooms or using supplementary ventilating
equipment. It is advisable to wear working clothing, safty glasses, ear protection and gloves
Danger
Flash point
Only use coating materials with a ash point of 21 °C or above without additional heating.
The ash point is the lowest temperature at which vapors develop from the coating material.
These vapors are su cient to form an in ammable mixture over the air above the coating material.
Danger
Explosion protection
Do not use the unit in work places which are covered to the explosion protection regulations.
Danger
Wearing personal protective equipment, such as dust
A tool or wrench that is in a rotating tool part can
A power tool that cannot be switched on or o is dangerous and has to be
GB
This ensures that
You work better and safer in the
This ensures that the
17
Publicité
Table des Matières
