Technical Data; Disposal - DS Produkte Z 07283 Mode D'emploi

Problem Possible cause / solution
• The needle has been inserted incorrectly.
• A poor needle has been used.
• The combination of needle size / thread strength / fabric is not right.
The needle
• The fabric is pulled too tight. Allow the transporter to push the fabric
breaks.
further. Do not pull on the fabric.
• The presser foot is loose. Tighten the screw of the presser foot with
a cross-head screwdriver.

Technical Data

Model number: FHSM-506
Article number: Z 07283
Power supply: 6 V DC, 1200 mA
Mains adapter:
Model number: SW-060120EU
Voltage supply: 100 – 240 V~ 50 Hz
Protection class: II

Disposal

The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be dis-
posed of alongside general household waste. Dispose of it at a recycling centre for
used electrical and electronic devices. You can obtain more information from your
local authorities.
35
Customer Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines are
subject to charges. The cost varies
depending on the service provider.)
EN
All rights reserved.