Assembling The Set-Up Kit - Graf 106850 Notice D'installation

4. Assembling the set-up kit

1.
Unfold the scum board. Place the clamps on ei-
ther side of the folding edges.
3.
Fix the partition wall with the U-clamps.
5.
Place the upper shell with the scum wall on top of
the lower shell. Assemble the clamps for connect-
ing the upper and lower shells.
4. Assembling the set-up kit
Insert the scum board into the upper shell. A
groove offsets in an off-centre position.
Continue assembling the Carat S tank according
to the installation instructions (seal, centring pins,
lubricant).
Assemble the clamps for connecting the upper and
lower shells.
16 / 44
2.
4.
6.