Configuration And Set-Up; Preparation; Connection Via Ethernet; Scope Of Applications - Telecom Behnke 20-2907A-IP Manuel D'utilisation

Behnke IP camera
GB GB

Configuration and Set-up

configurAtion And set-up
2.

2.1. Preparation

▸
Connect the IP camera to a 100 Mbit Ethernet
LAN
▸ Power supply via Power over Ethernet (PoE)
(1.6 on page 31)
▸
The IP camera requires a DHCP server for
operation. The camera cannot be operated
with a static IP address.

Connection via Ethernet

The IP camera is set up as a DHCP client, i.e.
it obtains its IP address from a DHCP server.
Use Behnke IP video software to locate existing
cameras within your network. Where the camera
is directly connected to PORT2 on the SIP basic
electronics, the camera's IP address will also be
displayed in the door intercom's web frontend.
If the camera is connected to a network in which
no DHCP server is available, the camera cannot
be operated.
34

Scope of applications

1. Using the IP camera with app functionality
In case you want to use the camera together
with your smartphone and the "TC Behnke"
app please have a look at chapter „App-Funk-
tionalität mit „TC Behnke" SIP App" on page
21 (cf. manual in the camera's Help
section).
2. Using the IP camera with a PC and the Behnke
IP video software ▸ Please have a look at the
separate instructions on IP video software
configuration as well as the system require-
ments on page 26. The IP video software is
available for download at: www.behnke-on-
line.de/downloads/software
▸
www.behnke-online.com