Connecting The Ip Camera With B-Smart Function (20-/21-/50-2907A-Ip, 43-9587A, 50-1204A/-1207A) Stand Alone (Without Behnke A/B Intercom) - Telecom Behnke 20-2907A-IP Manuel D'utilisation

1.8. Connecting the IP camera with B-Smart function (20-/21-/50-2907A-IP,
43-9587A, 50-1204A/-1207A) stand alone (without Behnke a/b intercom)
Camera power supply through POE class 0
*
Deep module housings not sufficient for IP camera
*
1
observe the relevant network technology standards and regulations for the network infrastructure.
When using the Behnke IP video software, please see the IP video software manual on our website
for further information on the IP video software: www.behnke-online.de/downloads
Important: Always use the latest version of the Behnke IP video software.
www.behnke-online.com
or
*
1
Network
Open door
function
Behnke IP camera
Introduction
Connecting cable
between the IP camera
with B-Smart function
and your button cannot
Key
exceed 50 cm
Wiring only in
connection with the open
door function via the "TC
Behnke" app
Voltage supply on site
Important: Observe the relay switching
capacities in the camera specifications
GB
33