Configuration And Set-Up; Preparation; Connection Via Ethernet; Scope Of Applications - Telecom Behnke 20-2913-IP Instructions

IP Camera Instructions
GB GB

Configuration and Set-up

configuration and Set-up
2.

2.1. Preparation

▸
Connect the IP camera to a 100 Mbit Ethernet
LAN
▸ Power supply via Power over Ethernet (PoE) or
suitable power supply unit

Connection via Ethernet

The IP camera is set up as a DHCP client, i.e.
it obtains its IP address from a DHCP server.
Use Axis Camera Management Software to
locate and set-up existing cameras within your
network. Changes to the IP configuration are
possible within 20 minutes after enabling the
power supply. To do so, enter the cameraʼs IP
address in your browserʼs address line. Click
on "Network TCP/IP settings" (1), to assign the
camera a static IP address.
38

Scope of applications

1. Using the IP camera as a B-Smart
camera ▸ In case you want to use the camera
together with your smartphone and the "TC
Behnke" app please have a look at chapter
"Behnke B-Smart" on page 39.
2. Using the IP camera with a PC and the Behnke
IP video software ▸ Please have a look at the
separate instructions on IP Video Software
configuration.
3. Using the IP camera as a surveillance camera
▸
Follow the instructions of your existing
video management system to add an "Axis
M3005 or M3007" type camera.
www.behnke-online.com