JVC KD-AHD59 Manuel D'instructions page 30

Category Menu items
COLOR 01
— COLOR 29,
USER
MENU COLOR
Menu color
RING COLOR *
Ring color
FADER* 8
Fader
BALANCE * 9
Balance
VOL ADJUST
Volume adjust
SUB.W FREQ
Subwoofer cutoff
frequency
*
7 Displayed only when Bluetooth adapter, KS-BTA200 is connected.
* If you are using a two-speaker system, set the fader level to "00."
8
*
9 This adjustment will not aff ect the subwoofer output.
30
Selectable settings, [reference page]
Select one of the preset or user color for display and button (except EQ/
/0) illumination.
(See also page 32 for USER color setting.)
• OFF:
• ON:
• OFF:
7
• ON:
FADER R12
— FADER F12:
BALANCE L12
— BALANCE R12:
VOL ADJ –10
— VOL ADJ +10:
[Initial: VOL ADJ 00]
• LOW:
• MID:
• HIGH:
Cancels.
Changes the display and button (except EQ/
illumination during menu, list search and playback mode
operations.
Cancels.
When a call comes in, the display will flash in blue.
• The display will change to the original color when you
answer the call or the incoming call stops.
When the unit receive a text message, the display only
illuminate in blue.
Adjust the front and rear speaker output balance.
[Initial: 00]
Adjust the left and right speaker output balance.
[Initial: 00]
Preset the volume adjustment level of each source (except
FM), compared to the FM volume level. The volume level
will automatically increase or decrease when you change
the source.
• Before making an adjustment, select the source you want
to adjust.
• "VOL ADJ FIX" appears on the display if "FM", "BT PHONE",
or "BT AUDIO" is selected as the source.
Frequencies lower than 72 Hz are sent to the subwoofer.
Frequencies lower than 111 Hz are sent to the subwoofer.
Frequencies lower than 157 Hz are sent to the subwoofer.
/0)