Bushnell IMAGEVIEW 78-7351 Guide Rapide page 6

To see thumbnails of multiple pictures stored in the memory while in Review mode, push the "Display" Button. You may see up to 9
pictures at a time. You move through the thumbnails by using the Up, Down, Left and Right arrows on the 4-way switch.
Press "Display" again to see a selected (highlighted) thumbnail as a full frame photo.
To exit from the Review mode, again press the "View" button. You are then back in Capture mode.
DELETING/PROTECTING PHOTOS AND FORMATTING A NEW SD CARD:
With the camera in the Review mode (press the View button if necessary), press the "MENU" button in the middle of the 5-way switch.
This opens the menu that will allow you to perform the following actions:
(use the 5-way switch and menu button as previously instructed to make choices from this menu, select or change settings, and return to the
main menu)
DELETE: Erases photos from the internal memory, or from the SD card if you have inserted one before beginning to shoot photos.
You may choose:
• One:
deletes the currently displayed
left/right arrow key to display the next photo you want to delete and repeat the process
• All: deletes all photos held in the internal memory or SD card
• Cancel: select if you decide not to delete a photo after entering this menu
FORMAT: Formats a new or previously used SD card to enable storing photo files. Select OK and press MENU after inserting a
card for the first time. Be sure the card has been inserted with the notched corner on the left as indicated below the card slot. Note
that formatting a card will erase any photos previously stored on the card. Note: "MMC" cards are not compatible and should not
be used.
PROTECT: Protects the currently displayed photo from accidental erasure. Pressing the MENU button will toggle between
10
photo only-after pressing MENU to delete
PROTECTED and UNPROTECTED. Once protected, a photo must be unprotected using this menu item before it can be
deleted.
SETUP: Provides same options as SETUP in the previous "Record" mode menu-those items can also be accessed while in Review
mode to change time/date stamp, beep on/off, etc.
EXIT: Returns to the regular Review mode (stored photos are displayed).
LCD DISPLAY SYMBOLS (ICONS VISIBLE IN CAPTURE OR REVIEW MODE AS INDICATED)
CAPTURE
Full
Full 1) Battery Meter: Displays battery level
Full
Low
Low
Low
Dead
ON
Dead
Dead
022 ON
ON
Full
Low 3M
022 2) Total Photos: Displays the total number of photos currently stored in internal or SD card memory. H
3M
022 * M
**
*** L
Dead
H
ON
M
3M
022 *
L
3M **
*
***
**
H
***
3M
H
3M H
*
M ** M
* *** L
M H
3) Resolution Setting: "3M": 2048×1536, "H": 1600×1200, "M": 1280×1024, "L": 800×600
**
L
*** M
L
L
*
*
**
a photo, use the * **
*** ***
**
4) Image Quality: *** "Best," ** "Better," * "Standard
***
Full
Low
Dead
Full 022
ON
Low Full
022
Low
Dead
ON 022
Dead 3M
5) Capture Mode: Normal (no icon), self timer (clock icon), sequential (multiple frame icon). 022 Full
3M ON H
* M Low
022 ** L
H *** Dead
022
M
3M
3M H Full
* M Low
L **
*** L 3M Dead Full
H 3M H
* M Low
** L
M *** Dead
H
L M *
**
L
***
* 6) SD card: Displayed when a card is inserted.
**
*
***
**
***
REVIEW
1) Photo number / Total Photos: Displays number of review photo / Total photos currently stored
2) Image Resolution: Indicates resolution of review photo
022
022
022
Full
Full
Low
Dead
022
Low
3M
Full
H 3M
Full
M H Low
L
M Dead Low
L
Dead
Full
Dead
Low
Dead
022
3M
H
M
L
*
**
***
022
ON
3M
Full
H
*
Low
M
**
L
*** Dead
11