How To Set The Low-Cut Filter - Beyerdynamic S 910 Mode D'emploi

1.5 How to adjust the gain of the handheld
transmitter
• To adjust the gain unscrew the complete microphone head with the upper
shaft as indicated by the arrows.
• Use a screwdriver to select the gain (0 dB, -10 dB, -20 dB, -30 dB).
• Standard setting: high gain (0 dB).
Unscrew microphone head

1.6 How to set the low-cut filter

• The CM 930 and EM 981 microphone capsules feature a low-cut filter to
compensate the close-miking effect which ususally occurs with directional
microphones. To set the low-cut filter unscrew the complete microphone
head with the upper shaft as indicated by the arrows.
• At the bottom of the microphone head you can set the low-cut filter.
• Standard setting: linear (position Lin)
Unscrew microphone head
Select gain
Set low-cut filter
33