Replacement Parts; Disposal; Declaration Of Conformity - J.C. SCHWARZ JTS 180 Mode D'emploi

Replacement Parts

Danger! If the supply cord is dam-
aged, it must be replaced by the man-
ufacturer or its service agent or similarly
qualified person in order to avoid hazard.
Warning! Replacement parts must
conform with the requirements speci-
fied by the manufacturer. Therefore use origi-
nal replacement parts only or spare parts au-
thorised by the manufacturer.
In case of service requests or spare parts, please
contact your local HORNBACH store or write an
email to: service@hornbach.com

Disposal

The crossed-out wheeled bin logo re-
quires the separate collection of waste
electric and electronic equipment
(WEEE). Such equipment may contain
dangerous and hazardous substances. These ap-
pliances must be returned to a designated collec-
tion point for the recycling of WEEE and must not
be disposed as unsorted municipal waste. By do-
ing so, you will help to conserve resources and
protect the environment. Contact your local au-
thorities for more information.
Children must not play with plastic bags and
packaging material, due to possible injury or dan-
ger of suffocation. Store such material safely or
dispose of environmentally friendly.
108 EN

Declaration of conformity

We declare, that the product described
in Technical Data:
Wall processing system JTS 180
manufactured for:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
and in accordance to the following applicable
harmonized standards:
EN ISO 12100:2010
EN 60745-1:2009+A11:2010
EN 60745-2-3:2011/A13:2015
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Andreas Back
Head of Quality Management, environment &
CSR
Person authorised to compile the technical file
Bornheim, 17.07..2020
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany