Care & Maintenance; Transport And Storage - J.C. SCHWARZ JTS 180 Mode D'emploi

Care & Maintenance
Caution! Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of oil
or grease.
- Wear safety glasses to protect your eyes whilst
cleaning.
- For safe and proper working, always keep the
machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the motor
and around the on/off switch. Use a soft brush
to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe it
with a soft damp cloth. A mild detergent can
be used but nothing like alcohol, petrol or other
cleaning agent.
- Never use caustic agents to clean plastic parts.
- Lubricate all moving parts at regular intervals.
- Periodically check all fixings. These could be-
come loose with time due to vibration.
- In case of excessive sparking, have the carbon
brushes replaced at your HORNBACH store.
Danger! The carbon brushes must only
be replaced by qualified electricians.
Danger! If the supply cord is dam-
aged, it must be replaced by the man-
ufacturer or its service agent or similarly
qualified person in order to avoid hazard.

Transport and storage

Before transport and storage:
- Make sure the tool is switched off and un-
plugged.
Store the tool and its accessories:
- together with this manual
- in a dry place above freezing temperature
- out of the reach of children.
EN 107