Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Product overview
1
Auxiliary handle
2
Auxiliary handle fixation knob
3
Spindle lock button
4
Ventilation throttle
5
Detachable guard
6
Spanner
7
Main handle
8
On/Off switch
9
Lock button
10
Speed dial
11
Hose connector
Preparing the tool
Warning! Switch off and unplug the
tool before any preparation, disassem-
bly, exchange and maintenance work.
1
AUXILIARY HANDLE
Loosen the two knobs
handle 1
counter-clockwise.
1
DUST COLLECTION
Slide the hose connector
exhaust as shown. Lock it in place by turn-
ing it counter-clockwise.
104
EN
Intended use
The tool is intended for dry sanding of drywalls,
ceilings and walls, grinding concrete, as well as
removing plaster, wallpaper, paint residues, ad-
hesives and loose plaster. The tool is not intended
for commercial use or for removing material con-
taining toxic materials e.g. Asbestos or lead.
Any other use or modification to the tool is consid-
ered as improper use and could cause consider-
able dangers.
2
2
of the auxiliary
2
11
onto the air
Set the auxiliary
handle 1
angle and re-tighten its two knobs
clockwise.
Plug the hose of an appropriate dust col-
lection system in the hose connector 11.
Warning! Never use the tool without a
dust collection system.
to the desired
2
Publicité
Chapitres
Table des Matières
