J.C. SCHWARZ JTS 180 Mode D'emploi page 102

f) Do not touch and/or inhale harmful/toxic
dust generated during sanding. All persons
in the vicinity of the work area must wear
appropriate personal protective equipment
for protection against harmful/toxic dusts.
Use the dust extraction facility and keep the
work area well ventilated.
g) Ensure that you have removed foreign ob-
jects such as nails and screws from the
drywall before commencing sanding.
h) Do not force sander, let the tool do the work
at a reasonable speed. Overloading will occur
if too much pressure is applied and the motor
slows resulting in inefficient sanding and pos-
sible damage to the sander motor.
i) Don't continue to use worn, torn or heavily
clogged sanding paper.
j) Don't touch the moving sanding paper.
SAFETY WARNINGS SPECIFIC FOR WIRE
BRUSHING OPERATIONS:
a) Be aware that wire bristles are thrown by
the brush even during ordinary operation.
Do not overstress the wires by applying ex-
cessive load to the brush. The wire bristles
can easily penetrate light clothing and/or skin.
b) If the use of a guard is recommended for
wire brushing, do not allow any interfer-
ence of the wire wheel or brush with the
guard. Wire wheel or brush may expand in di-
ameter due to work load and centrifugal forces.
RESIDUAL RISKS
Even if you are operating this product in ac-
cordance with all the safety requirements,
potential risks of injury and damage remain.
The following dangers can arise in connection
with the structure and design of this product:
1. Injuries and damage to property due to broken
application tools.
2. Danger of injury and property damage caused
by flying objects.
102 EN