Klarstein VITAIR POMMESMASTER Mode D'emploi page 26

EN
26
If no mode setting is made, the appliance can still be used if the preparation
time and temperature setting are made. If you press the TEMP/TIME button,
"°C" will be displayed on the LED screen. You can press the +/- buttons to
adjust the temperature. Each press changes the temperature by 10°C. Press the
7
button again after adjusting the temperature. min" flashes on the LED screen.
Use the +/- buttons to adjust the preparation time. Each time the button is
pressed, the preparation time changes by one minute. Press the START button
when you have finished your setting.
Press the START button to start the appliance. The cooking pan rotates
8 continuously during operation. In the inclined position, the food in the cooking
bowl is turned for even browning.
When a certain temperature is reached, the heating element may pause.
As soon as the temperature drops, the heating element is automatically
9
reactivated. This process is repeated each time the temperature you set is
reached.
If food needs to be added during preparation, first move the appliance to
the straight position by pulling the handle. Then, after pressing the lid release
10 button, pull the lid upwards. The appliance will then stop heating immediately.
If you close the lid again after adding the food, the preparation process
continues. Never open the lid when the appliance is in the inclined position.
As soon as the set preparation time has elapsed, the appliance beeps. Unplug
the appliance from the wall outlet and remove the food. Take care to avoid
11
burns. Place the cooking pan on a fireproof surface to prevent damage to the
worktop.
12. in standby mode, press the PRESET button and then set the cooking time.
The preset preparation time is 30 minutes. Each time this button is pressed, the
preparation time is adjusted by 60 minutes. The adjustable time range is from
1 minute to 12 hours. Once the time setting has reached one hour, each press
adds another hour. After setting the preparation time, press the START button.
12
Then press the Menu button to select the desired mode. Press the TEMP/TIME
button to adjust the temperature and preparation time. If you then press the
START button to confirm, the appliance starts operation and the preparation
time is counted down. An alarm icon will appear on the LED screen during the
countdown.