Offset Temperature; Selection Of Temperature Display/Humidity - Alpha IP RTD 61001 Serie Mode D'emploi

wheel.
3. Set the year, month, day and time by turning/pressing the setting wheel (E)
and conform each.

6.1.7 Offset temperature

Since the temperature is measured at the room control unit Display, it may be warm-
er or cooler in another position on the room. This deviation is corrected using the
offset temperature (up to ±3.5 °C).
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol "
ting wheel.
3. Turn the setting wheel and confirm the desired offset (max. ±3.5 °C) by shortly
pressing the wheel.

6.1.8 Selection of temperature display/humidity

The display alternately shows the actual or the set temperature as well as the hu-
midity, as required.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol "
wheel.
• "ACT" for displaying the actual temperature (Default value) or
• "SET" for displaying the set temperature or
Operating modes and configuration
" and confirm the selection by shortly pressing the set-
" and confirm the selection by shortly pressing the setting
49