Conformity; Function - Alpha IP RTD 61001 Serie Mode D'emploi

Function

• Only use the device if it is in flawless state.
• Observe the performance limits of the device and its environmental conditions.
• Only operate this device in a dry and dust-free environment.
• Do not expose the device to humidity, vibration, continuous sunlight or other
types of heat radiation, coldness, or mechanical loads.Ensure that children do not
play with this device or the packaging. Children must be monitored if necessary.

2.3 Conformity

Hereby the Möhlenhoff GmbH declares that the device complies with Regulation
2014/53/EU. The complete text of the EU Conformity Declaration is available under
the following URL: www.alphaip.de/conform/en/rbg
3 Function
The Alpha IP room control unit Display RTD 61001-xx allows to set the room temper-
ature in a time-controlled way in order to adapt the heating phases to your individual
requirements. The room control unit measures the temperature and transmits these
data cyclically to the Alpha IP Base station FAL-x10x1-xx or to connected Alpha IP
radiator thermostats. The registered values allow an exact regulation of the room
temperature. The target temperature can be set manually with the setting wheel.
Communication with other components will be performed over the Homematic
(HmIP) radio protocol. The radio transmission is done on a non-exclusive transmis-
sion path; thus, disturbance cannot be completely excluded. Disturbance impacts
36