Programming Of Heating Profiles - Alpha IP RTD 61001 Serie Mode D'emploi

6.1.5 Programming of heating profiles
This menu item allows to make settings for heating or cooling profiles and the cre-
ation of week profiles according to own requirements.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol "
wheel.The following subordinate menu items are available in the menu, to be
accessed by turning the wheel:
"type" for switching over the base station between the modes Heating and Cool-
ing. (deactivated when multi-IO box is connected)
1. Turn the setting wheel (E) to "HEAT" for heating or "COOL" for cooling and con-
firm by shortly pressing the wheel.
"Pr.nr" for the selection of the week profile number ("no. 1, no. 2 ... no. 6").
1. Select the number of the desired profile and confirm the selection by shortly
pressing the setting wheel.
"Pr.Ad" for the individual setting of the week profiles („no. 1, no. 2 ... no. 6"). Up
to 6 heating phases (13 switch-over points) can be set in the week profile for every
week day for the selected heating profile. Programming is made for the selected
days for the time from 00:00 to 23:59 o'clock.
1. In the menu item "Pr.Ad", select the number of the desired profile by turning
the setting wheel (E) and confirm the selection by shortly pressing the wheel.
2. Select the desired week day/working day/weekend/all days by turning the setting
Operating modes and configuration
" and confirm the selection by shortly pressing the setting
47