Modifying Programs; Deleting Entered Programs - Perry Electric 1IO6081 Mode D'emploi

8 - MODIFYING PROGRAMS

To modify the days, On and/or
"Reading programs". Modify the day or group of days
Using the key, modify the On
with OK. Use the PROG key to search for another program or return to "operating status."
Note: to modify only the day and/or
ATTENTION: programs set from 1 to 99 seconds can only be modified by the number of seconds.
To transform them into programs with On/OFF time, first delete the single program, then reprogram with On and OFF time (and vice-versa).
Note: changes take effect after the current minute.
Prog Day
1 2 3 4 5 6 7 1 2 3 4 5 6 7
Prog
1 2 3 4 5 6 7

9 - DELETING ENTERED PROGRAMS

From normal operation, press
simultaneously press the OK and
gram the same program, press
operation pressing PROG.
Prog
1 2 3 4 5 6 7 1 2 3 4 5 6 7
OFF time of a program: select the program to be modified with the
(Weekly model only)
time and confirm with OK. Press
OFF time, when program is displayed (
Ok
1 2 3 4 5 6 7
Ok
1 2 3 4 5 6 7 1 2 3 4 5 6 7
PROG to enter into "Reading programs." Use
PROG keys to delete (all parameters contained in the single program will be deleted). To repro-
OK and set the new program as indicated in the PROGRAMMING chapter, or else return to normal
Prog
Delete
Prog
1 2 3 4 5 6 7
with the DAY key and confirm with
PROG to display the OFF time and modify using
On time), press PROG to display the
Ok
1 2 3 4 5 6 7 1 2 3 4 5 6 7
Prog Prog
1 2 3 4 5 6 7
PROG to search the program to be deleted then
Ok
Ok
To reprogram
or
Prog
To exit from reading programs
1 2 3 4 5 6 7
PROG key as indicated in chapt.
OK.
, then confirm
OFF time and modify.
EN
25