Volpi KV360 Mode D'emploi page 40

C. Remove the rubber cover and turn
counterclockwise to remove the hexagon socket
screw
E. According to the direction shown in the
picture, remove the blade cover and take the
blade.
G. According to the direction shown in the
figure, grease the gear of the moving blade,
insert the moving blade and close with the
cover.
40
C
D. Turn counterclockwise as shown in the picture,
remove the M3 screw from the blade cover.
E
F. Clean up the rubbish as shown and grease it.
G
H. Screw the M3 hexagon socket screw as shown.
D
F
H