Radiometer Analytical ABU62 Guide D'utilisation page 7

2. Connect the ABU62 PC/TIM socket to the Titration Manager Local
socket. Use cable, part no. A95X501. Two ABU62's can be
controlled by the same Titration Manager. Connect the instruments
as follows:
LINE FUSE T1A L250V
To a mains
socket
3. Connect the mains socket of the ABU62 and the Titration Manager
to the mains supply using the 3-lead power cord provided.
The ABU62 and the Titration Manager must be connected to an
earthed mains socket for safety reasons. Efficient grounding is
essential for reliable measurements and security.
In the USA or Canada, use a UL listed power cord only.
4. Switch on the ABU62 (O/I power switch set to "I") then the Titration
Manager. The ABU62 display is as follows:
Titration Manager
MADE IN FRANCE MADE IN FRANCE RADIOMETER ANALYTICAL SAS RADIOMETER ANALYTICAL SAS
PROPELLER PROPELLER
LINE FUSE T1A L250V LINE FUSE T1A L250V
12 12V OUT V OUT IN IN
5V OUT V OUT
90-264 90-264 Vac ac
47-63 Hz 115 47-63 Hz 115VA VA
GND GND TEMP TEMP
I
To a mains
O
socket
MADE IN FRANCE RADIOMETER ANALYTICAL SAS
SLAVE PC/TIM
PROPELLER
AUX.
90-264Vac Vac V c
47-63Hz 115 VA
GND TEMP Pt-Pt REF E2 E1
ABU62 Number 2
"ABU2"
SLAVE SLAVE PC/PRINTER PC/PRINTER
LOCAL LOCAL BALANCE BALANCE
SAC80/90 SAC80/90 AUX. AUX.
Pt-Pt Pt-Pt REF REF E2 E2 E1 E1
12 V OUT 5V OUT IN
Cable, part no. A95X501
MADE IN FRANCE MADE IN FRANCE RADIOMETER ANALYTICAL SAS RADIOMETER ANALYTICAL SAS
SLAVE SLAVE
PROPELLER PROPELLER
LINE FUSE T1A L250V LINE FUSE T1A L250V
90-264 90-264 Vac ac
47-63 47-63 Hz 115 Hz 115VA VA
GND GND TEMP TEMP Pt-Pt Pt-Pt REF REF
I
O
To a mains
socket
7
PC/TIM PC/TIM
AUX. AUX.
E2 E2 E1 E1
ABU62 Number 1
"ABU1"