BHP1500-2 SPK 1a
14.08.2002 16:40 Uhr
Before starting operation, be sure to
read the operating and safety
instructions!
Proper use
The hot air gun is designed for heating
shrink-down plastic tubing, for stripping
paints and for welding and shaping
plastics.
Attention:
Fire hazard during use! Diagram of
the hot air pistol BHP 1500:
1 nozzle
2 2 level ON/OFF switch
level 1: 375°C / 400 l/min
level 2: 500°C / 550 l/min
3 suspension shackle
4 power cable
5 Deflector nozzle
6 Fishtail nozzle
7 Cone nozzle 20 mm
8 Reflector nozzle
Technical data:
Nominal voltage:
230 V ~ 50 Hz
Power rating:
1500 watt
Temperature:
375°C / level 1
500°C / level 2
Air rate:
400 l / level 1
550 l / level 2
Sound pressure level LPA :
Sound power level LWA :
Vibration a
–
< 2,5 m/s
w
Weigth
Seite 7
Safety Instructions:
G
Before plugging in the power supply
cord, be sure that the ON/OFF switch
is in the central position.
G
The nozzle reaches temperatures
of up to 600°C. Fire hazard! Wear
protective gloves and eye wear.
The nozzle should not be touched
during operation.
G
Allow the hot air pistol to completely
cool before putting away.
G
Never expose the unit to rain or
moisture. Store the unit in a dry place.
G
Do not leave the unit unattended.
Keep out of reach of children.
G
Never direct the air flow at people
or animals. Do not use the unit to
dry clothing or hair. Do not use the
hot air blower as a hair dryer.
G
Do not use the unit near easily
flammable or explosive substances or
gasses.
G
Never block the hot air flow by
plugging or covering the air flow exit.
G
Use only original accessory and
replacement parts from the
manufacturer.
G
Do not wear loose clothing or jewelry.
Wear slip-resistant shoes and wear a
hair net for long hair. During operation
maintain a secure footing.
G
Never use the unit in wet
surroundings or in areas with high
humidity (bathroom, sauna, etc.).
72 dB(A)
G
Check your work area for easily
82 dB(A)
flammable substances and materials
before using the hot air pistol.
2
G
Never carry the hot air pistol by the
0,7 kg
power supply cord.
GB
7