Connecting/Disconnecting A Registered Bluetooth Device; Deleting A Registered Bluetooth Device - JVC KW-NSX700 Mode D'emploi

2
Change the PIN code.
• You can skip changing the PIN code.
• The maximum digit of the PIN code that can be
set is 16.
PIN code (initial: 0000)
• The Bluetooth connection by <Audio
Connection> is only available when
"Pandora" or "BT Audio" is selected as the
source.
• The Bluetooth connection by <Pandora
Connection> is only available when
"Pandora" is selected as the source.
3
Operate the Bluetooth device to
connect.
When pairing is complete, the device is listed on
<Connect Device>. To use the paired device,
connect the device on <Connect Device>
(☞ the right column).
1
2
Deletes last entry
1
2
54
Connecting/disconnecting a
registered Bluetooth device
Display the <Bluetooth Setup> screen.
(☞ page 53)
To connect
Select [Connect] for the target device, and then
select the device you want to connect.
"Connected" appears. Press [OK] to confirm the
operation.
• All registered devices (mobile phone and audio
player) are listed on <Connect Device>.
– Selectable items depend on the device you
are operating.
To disconnect
Select [Disconnect] for the target device.
A confirmation message appears. Press [Yes].
Deleting a registered Bluetooth
device
On <Connect Device> screen (☞ Step
Select a device to delete.
A confirmation message appears. Press [Yes].
2
above)