Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The set value is confirmed by pressing the
The number of settings in the menu is modified with the
To exit from the settings menu, you must choose the setting "End" and press on the key
key.
Temperature measuring unit
Preset value
°C (Celsius)
Selecting the display format of the "time" clock:
24H
24:00
12h
12:00
Preset value
24H
DST - Daylight saving time
If this function is activated, the thermostat automatically changes
the time (summer/winter) according to the date.
Preset value
Yes (function
activated)
Calibration of the temperature sensor.
The first screen shows the measured temperature. Press the
pour afficher la valeur de décalage.
key to display the offset value.
If "no" is displayed, the sensor has not been calibrated (offset
value equal to zero). Configuration of the temperature: Press
or
to configure the temperature value.
Press
to confirm the configuration.
How to calibrate the temperature sensor:
Calibration must be done after 1 day of use with the same
temperature configuration, as described above:
• Place a thermometer in the room, at the same distance from the
floor as the thermostat. Check the actual room temperature after
1 hour.
• Enter this value in the calibration settings menu using this
function..
Press
or
to enter the actual value.
Press
to confirm the calibration.
[ 52 ]
key.
Other choices
°F (Fahrenheit)
Other choices
12h
Other choices
No
.
Publicité
Table des Matières
