Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Consumption mode
This mode is only available if the user has configured a heater.
If you press
or
24 hours, last 7 days and last 30 days) The power values are displayed in kWatt.
If you do not press any button, the thermostat will automatically return to the previously selected
mode.
If you press
you can return to the selection mode menu.
If you press
for one second you will reset the energy consumption values to zero
If you press
you stop the unit.
The estimated values are saved in the memory every 4 hours and every time the user displays
this menu.
If there is a power cut, the estimated values are maintained for 24 hours after reconfiguration.
Changing the user programme
When you modify a user programme, the thermostat displays:
you can modify the interval time for displaying the power consumption (last
[ 49 ]
Publicité
Table des Matières
