DELTACALOR TELICA CINTRE Notice D'utilisation Et D'installation page 45

Frost protection mode
This mode confi-
gures the unit in
frost protection
mode.
On the screen sa-
ver, if you press the
key and , the
temperature setting
for frost protection
starts to blink and
you can modify it.
If you press the
key, the value of the
temperature setting
is activated.
On the screen saver,
the key allows
you to switch the
display from the
measured tempera-
ture to the set temperature.
deactivated
If you press the , key, the navigation menu will be displayed.
If you press the , key, the thermostat is deactivated.
Preset value: 7°C
Interval: from 0.5°C to 10°C.
Off mode (OFF)
In Stop mode the symbol is
displayed in OFF mode
After you have pressed on
any of the 4 keys (
or or ), the measured
temperature is displayed.
After a few seconds, this
information is no longer
displayed.
This mode applies a zero
reference temperature.
If you press the key
thermostat reactivates in
the last selected mode
.
or
, the
[ 45 ]