Bridge Burner; Dual Surface Unit; Surface Units; Temperature Limiter - GE JCP930 Manuel D'utilisation

Using the surface units.
Large 9"
surface unit
setting
Small 6"
surface unit
setting
6

Dual Surface Unit

The right front surface unit has 2 cooking sizes to
select from so you can match the size of the unit
to the size of the cookware you are using.
To use the large (9 inch) surface unit,
turn the SELECTOR knob clockwise to
Push in and turn the control knob to the
desired setting. The unit will heat the
entire area contained by the larger circle.

Bridge Burner

You can create an oblong heated area by using
the left rear unit in addition to the front unit
bridge combination.
When the burner select knob points to
BRIDGE, the LEFT knob controls both the
left front surface unit and the bridge area.

Temperature Limiter

Every radiant surface unit has a
temperature limiter.
The temperature limiter protects the
glass cooktop from getting too hot. It will
also cause the elements to cycle quickly.
To use the small (6 inch) surface
unit, turn the SELECTOR knob
counterclockwise to
turn the control knob to the desired
setting. The unit will only heat the area
.
inside the smaller circle.
Choose pans that match the circle/bridge
area as closely as possible.
When the burner select knob points to
FRONT, the LEFT knob controls the left
front surface unit only.
The temperature limiter may cycle the
units off for a time if:
The pan boils dry.
The pan bottom is not flat.
The pan is off center.
There is no pan on the unit.
. Push in and