You can stop any process, toasting, reheating and defrosting, by
pressing the CANCEL button.
The appliance will automatically switch off and the lever will
return to it's original position, lifting the toasted slices.
The toasting time depends on the dampness of the bread and
the thickness of the slice. If you only place one slice into the
toaster, it is possible that with the same setting the slice will
brown more. Select a lower setting of the browning level.
If for whatever reason, a piece of bread is caught into the
toasting slots, do not try to remove it immediately. Use the hi-lift
function to lift the piece of bread higher to remove it easier. If
this does not work, unplug the toaster and leave it to cool down
first. Than try to remove the piece carefully without touching the
heatingelements.
5
to warm up bread rolls
• Pull the lever on the left downwards. The bun warmer will
automatically rise.
• To prevent overheating, set the browning level to position 1.
• Place the rolls (max. 2) you want to warm on the bun warmer
and push the bread lift lever down. The indicator light in the
CANCEL button will light up.
• If you only want to warm one bun, place it towards the center
on the bun warmer.
• Lift the lever on the left to lower the bun warmer after you
have finished warming bread rolls.
Never place bread rolls directly on the toaster to prevent
damage to the appliance. Always use the bun warmer for
warming bread rolls.
6
cleaning & maintenance
Always unplug the appliance before cleaning. Wipe the outside
of the housing with a damp cloth and dry.
Never use any abrasives! Never immerse the appliance into
water or other liquids.
Remove the crumbtray at the bottom
of the toaster for easy cleaning of the
inside. Pull the crumbtray carefully
at the handle from the side of the
toaster. Remove the crumbs and
clean the crumbtray with a damp
cloth. Slide the crumbtray back into
the toaster after cleaning. Check the
correct placement of the crumbtray
before re-use.
11
English
•